ScrapScrapAB-078
Aluminium UBC Scrap (Baled)
Taldon
Finish / packing: Loose, Baled, Briquetted, Shredded
Key specs: Recovery %, Contamination, Moisture / oil, Packing, Spectro report
Used in: Can sheet, Secondary smelters, Deox
Aluminium Extrusion Scrap (Painted / Thermal Break) 6063 painted · Scrap · Scrap
Aluminium Extrusion Scrap (Painted / Thermal Break) is traded in scrap form, sourced from painted or thermal-break profiles. Aluminium scrap is metal recovered from production waste or end-of-life products, traded by grade such as UBC, extrusion scrap, mixed castings or turnings. It is remelted into secondary alloys or, when clean and segregated, back into wrought products.
Specifications at a glance
| Category | Scrap (Aluminium scrap by ISRI & trade grade) |
|---|---|
| Form | Scrap |
| Grade / code | 6063 painted |
| Source | Painted or thermal-break profiles |
| Finish / packing | Loose, Baled, Briquetted, Shredded |
| Specs to agree | Recovery %, Contamination, Moisture / oil, Packing, Spectro report |
| Typical uses | Secondary smelters |
| Type | Recycled |
| Catalogue code | AB-086 |
What to check before you buy
- Recovery %: Recovery is the metal you get back after melting scrap or dross. Agree how it will be checked, for example a trial melt on a sample, and how it affects the rate.
- Contamination: Iron, plastic, rubber, dirt and other metals reduce value and can spoil a melt. Agree an acceptable limit and how deductions will be made on arrival.
- Moisture / oil: Wet or oily scrap and turnings lose weight on melting and are a safety risk in the furnace. Agree a limit and whether material must be dried or de-oiled.
- Packing: Agree how material is bundled, strapped, palletised or wrapped, and how it is protected from moisture and damage in transit. Poor packing is a common cause of claims.
- Spectro report: A spectro (optical emission spectrometer) report shows the element-wise chemistry of a sample. Agree who draws the sample, from which part of the lot, and which lab result will settle a dispute.
- Lot check: Ask for photos of the actual lot, the grade or ISRI code word, and how much iron, plastic, rubber, oil, moisture or dirt is present. Agree a recovery or contamination basis and how weight and deductions will be settled.
Who buys material like this
Secondary smelters, alloy ingot makers, extruders and rollers with remelt capacity, and scrap aggregators.
How to get a quote
- Share your need
Grade, size, quantity and delivery city. - Get quotations
The desk collects quotes from verified suppliers and emails them to you. - Check quality
Spectro report, mill certificate or sample of the actual lot. - Confirm bulk
Rate, GST, freight and payment terms in writing.
Other scrap
ScrapScrapScrapAB-079
Aluminium UBC Scrap (Shredded)
Talcred
Finish / packing: Loose, Baled, Briquetted, Shredded
Key specs: Recovery %, Contamination, Moisture / oil, Packing, Spectro report
Used in: Can sheet, Secondary smelters
ScrapScrapAB-080
Aluminium UBC Scrap (Densified)
Taldack
Finish / packing: Loose, Baled, Briquetted, Shredded
Key specs: Recovery %, Contamination, Moisture / oil, Packing, Spectro report
Used in: Secondary smelters
ScrapScrapAB-081
Aluminium Can Stock (New)
Take
Finish / packing: Loose, Baled, Briquetted, Shredded
Key specs: Recovery %, Contamination, Moisture / oil, Packing, Spectro report
Used in: Can sheet, Rolling mills
ScrapScrapAB-082
Old Sheet Scrap (Mixed Alloy)
Taint/Tabor
Finish / packing: Loose, Baled, Briquetted, Shredded
Key specs: Recovery %, Contamination, Moisture / oil, Packing, Spectro report
Used in: Secondary smelters, Alloy making
ScrapScrapAB-083
Mixed Low Copper Clippings & Solids
Taboo
Finish / packing: Loose, Baled, Briquetted, Shredded
Key specs: Recovery %, Contamination, Moisture / oil, Packing, Spectro report
Used in: Remelt, Alloy making
Related guides
ADC12 vs LM6 vs LM24: Choosing an Aluminium Casting AlloyAluminium Scrap Grades Explained: ISRI Code Words and Indian Trade NamesHow to Check Aluminium Scrap Recovery Before You BuyHow to Write an Aluminium RFQ That Gets Comparable QuotesHow to write an aluminium requirement
Need material this week?
Post your requirement and get quotations from verified suppliers, usually within a working day.
Questions buyers ask
What is the price of Aluminium Extrusion Scrap (Painted / Thermal Break)?
Prices for Aluminium Extrusion Scrap (Painted / Thermal Break) move with the LME aluminium price, local premiums, alloy or conversion costs, quantity and freight. Post your requirement with quantity and delivery city, and the AluminumBazaar desk shares current quotations from verified suppliers, including GST and freight terms.
Which specifications should I check for Aluminium Extrusion Scrap (Painted / Thermal Break)?
Agree Recovery %, Contamination, Moisture / oil, Packing, Spectro report with the supplier, ideally with limits and a report per lot or heat. Ask for photos and a sample or spectro report of the actual lot before bulk.
What is Aluminium Extrusion Scrap (Painted / Thermal Break) used for?
It is commonly used in secondary smelters.
Can I check a sample first?
Yes. Mention samples or a spectro report in your enquiry and the desk arranges it before you confirm bulk quantities.